about a six

View Original

Some problems are best solved with power-tools

We couldn't lift the engine out with a crane because the liberty was a little bent around it and also we didn't have a crane. So we used a power-saw to lop the front off the car and then we could just roll then engine out.

Next to remove the flex-plate from the engine. It was secured with stupid torx-plus bolts, which stripped even when using the proper tool (yes, we were using it improperly, but at least we tried), so we drilled them out. It took hours.

Now we just need to bolt it all up!

Hahahahaha, no.